From a Campervan Joke to Custom CAD Solutions: The Story Behind Our 61.7mm Bike Rack Rail End Caps
What started as a joke about replacing £20 factory end caps on a father's campervan turned into a custom CAD project. Read how we reverse-engineer 61.7mm Fiamma bike rack rail caps with precision taper locks to replace cracked or missing road plastics.
3D Printing Specialist Studio · Wimborne, Dorset
It’s an all-too-common frustration for motorhome and campervan owners: you’re packing up after a weekend trip, and you notice one of the plastic end caps on your bike carrying rail has cracked, weathered or fallen off somewhere along the motorway.
When my father noticed the weathered end caps on his own campervan bike rack, he looked up the official replacements. The verdict? Nearly £20 each for simple moulded plastic pieces!
Half-joking, he turned to me and said, "You could probably 3D print something to replace these, couldn't you?"
Challenge accepted.
The Reverse-Engineering Process: From Photo to Printed Part
Replacing small, discontinued or overpriced parts is where additive manufacturing really shines. However, matching an aluminium extrusion profile precisely requires exact geometry so the cap slides on smoothly without rattling loose on the road.
Here is how I engineered the first replacement:
Capturing the Profile: I took a straight-on photo directly down the open end of his aluminium rail extrusion to capture the true cross-section.
Scaling & Tracing in CAD: I imported the image into my CAD software, scaled it 1:1 using physical calliper measurements of the rail, and traced the precise outline of the aluminium wall.
Engineering the Fit: Rather than making a loose slide-over shell, I engineered a subtle internal taper. This allows the cap to glide easily over the initial edge of the rail and progressively lock firmly into place as it’s pushed fully home.
Extruding & Printing: Once the profile sketch was locked in, I extruded the 3D model, sliced it and printed the initial prototype.
The result was a solid, rattle-free fit that looked great, stayed securely in place and saved my dad a bundle.
Expanding the Range: Different Rails, Same Precision
Once the workflow for the first rail shape was established, expanding the range was straightforward. By using the exact same photo-tracing and taper-locking techniques, I reverse-engineered caps for other common bike carrying rails, including 61.7 mm Fiamma Carry-Bike rail end caps and 64.75 mm Omni-Bike rail end caps.
Today, these caps are produced in colour-matched pairs using high-density thermoplastics, with each design shaped around its particular rail profile.
Key Features & Engineering Details
Precision Tapered Lock: Custom-engineered internal taper ensures a smooth slip-on fit that wedges firmly onto the aluminium rail.
30+ Years of Engineering Expertise: Designed from scratch to exact tolerances for clean layer lines and a high-quality surface finish.
61.7 mm Rail Fit: The Fiamma version is designed for compatible Carry-Bike rail profiles measuring 61.7 mm wide. The separate Omni-Bike version is designed for a 64.75 mm profile.
Colour-Matched Pairs: Printed in red as standard, with black, grey and white available on request. Each pair is printed from the same filament batch for consistent colour.
Tip before ordering: Aluminium rail profiles vary between manufacturers and model years. Measure the width across the open rail end with a ruler or callipers, then compare the profile with the listing. Width and brand name alone do not confirm a match.
Replacing a missing cap? Shop the 61.7 mm Fiamma pair or view the 64.75 mm Omni-Bike pair and check the fitment details before ordering.
Need a Custom Fitting or Replacement Cap?
Got a weathered, broken or obsolete plastic component on your campervan, boat or machinery? A custom replacement may offer a practical alternative to an original spare.
Send 3D Quality Prints a clear photo looking down the end of the profile along with basic dimensions. We provide personal responses within 24 hours and free, no-obligation quotes, with no minimum order requirements!